Your AirPods are flashing red? Here we explain what this means and how you can fix problems associated with the red flashing. At the end of the article we answer frequently asked questions. Let's get started right away!
My AirPods are flashing red and won't connect
If your AirPods are flashing red, there could be several reasons. We'll look at the most common case (red flashing and connection doesn't work) first.
Fortunately, the solution is relatively simple. In most cases, red flashing on AirPods signals a pairing error. This is how you can quickly fix the problem:
-
Unpair your AirPods: Go to “Settings” and then “Bluetooth”. Now go to the i symbol next to your AirPods and tap “Ignore this device”.
-
Turn off Bluetooth: Next, turn off your iPhone's Bluetooth.
-
Check the battery level: Next, make sure your AirPods are sufficiently charged. If the battery is too low, problems can arise later.
-
Reset AirPods to factory settings: Now reset your AirPods. To do this, hold down the button on the back of the charging case for about 15 seconds until the LED light flashes alternately white and yellow.
- Create a new connection: Now turn the Bluetooth back on and connect your AirPods to your iPhone. Check whether the connection now works.
More reasons: Why are my AirPods flashing red?
1. AirPods flashing red due to low battery
If the batteries in your AirPods are low, they may flash red to indicate that they are low on battery. You should then connect it to the charging case to charge it.
2. AirPods flashing red due to charging error
If there are problems charging, the AirPods may also flash red. Make sure the AirPods are properly seated in the charging case and that the charging case itself is charged.
3. AirPods flash red because a firmware update is in progress
Sometimes AirPods may flash red when a firmware update is in progress. This usually happens automatically in the background. Just leave it in the charging case and the update should finish soon.
4. Hardware error
In rare cases, hardware problems can cause the AirPods to flash red. In this case, it may be necessary to contact
What to do if the red flashing of the AirPods indicates a defect?
If you have followed the steps above and the AirPods are still flashing red, this may indicate a defect.
If your AirPods are under warranty,
If the warranty has expired, a repair could be an option. However, these are often expensive.In such a case, you could still consider replacing your AirPods with a newer model.
If necessary: Request a spare part
If only one of your AirPods is defective, you can purchase a single left or right AirPod in our online shop. This is significantly cheaper than buying a complete AirPod set.
We sell individual AirPods because you can only buy complete bundles from the manufacturer. However, this is not necessary if only one AirPod is defective.
Our individual AirPods are of course originals and come with a guarantee. Because we buy complete sets from the manufacturer and disassemble them into their individual parts, which we then sell separately.
Frequently asked questions
AirPods flash white then red: What does that mean?
If your AirPods flash white and then turn red, it could indicate a charging issue, charging case issue, connection issues, or a possible hardware failure.
What to do if the AirPods flash red?
If your AirPods are flashing red, there are several steps you can take to resolve the issue:
- Charge the AirPods
- If the AirPods do not charge: Use a different charging cable and charger
- Check the AirPods for dirt and grime. Clean them if necessary
- Update the firmware
- Nothing helped? There may be a hardware problem
What does orange light mean on AirPods?
Orange light on AirPods usually means the same as red light. Orange light can have the following causes:
- Load error
- Connection error (pairing error)
- Low battery
