Your AirPods beep, hiss or beep slightly? This is annoying. But don't worry: in this article we'll go through the causes and all relevant solutions to the problem. Let's get started straight away:
Why are my AirPods / AirPods Pro beeping?
Only in the worst case can the beeping be attributed to a hardware defect. In this case, the AirPods would have to be replaced. But the problem is often easier to solve because it can be traced back to other causes. Make sure the AirPods are reasonably charged before attempting the following solution steps:
Solution 1: Disconnect and re-pair AirPods
It may be enough to disconnect the AirPods and then re-pair them. You can do this via the Bluetooth settings. From there, tap the name of your AirPods and then tap “Ignore this device.” Once you've done that, reconnect your AirPods. Place the device in the immediate vicinity of your headphones to ensure a stable Bluetooth connection and establish a new connection. Now check whether the beeping or noise has stopped.
Solution 2: Turn down the volume
It sounds simple, but too high a volume could be responsible for the beeping or increased noise. Reduce the volume and check whether the problem has been solved.
Solution 3: Update firmware
Funny noises on AirPods Pro can also be caused by outdated software on the playback device. Therefore, it is advisable to check the firmware version on all devices connected to the headphones.
Solution 4: Rule out noise canceling problems
The noise canceling function can cause the AirPods Pro to sound strange, beep slightly or crackle. This occurs, for example, if the microphones that record ambient noise are dirty. To resolve any noise cancellation issues, it is necessary to clean the earbud microphones. Caution is advised as the AirPods are sensitive. Choose a clean and well-lit work environment and only use the cleaning products recommended in our detailed cleaning guide.
Solution 5: Reset AirPods to factory settings
The beeping is still there? Then it's time to reset your AirPods to factory settings. This could fix the problem. To reset follow these steps:
- First turn off Bluetooth on your device
- Put both AirPods in the charging case and leave the lid closed for 30 seconds
- Open the charging case lid, but leave the headphones in the case
- Press the button on the back of the charging case and hold it down for about 15 seconds. The LED light should initially flash white and then flash yellow after a few seconds
- Reconnect the AirPods by turning on Bluetooth. If the connection does not occur automatically, tap “Connect” on your device
Solution 6: Accidentally typed “Play sound” in the “Find My” app?
The Find My app lets you view AirPods on the map and play a sound to help you find them if they're misplaced.You may have activated the app and forgotten to turn off the sound.
Solution 7: Request a replacement AirPod
If none of the previous solutions worked, your AirPods (or a single AirPod) are probably defective. In this case, you can check whether you still have a warranty on them. If so, contact
If only one of your AirPods beeps, you can also purchase individual AirPods in our online shop. The manufacturer only sells AirPods in bundles, which are of course more expensive. That's why we also offer individual AirPods. Our individual AirPods are
Frequently asked questions
What if the AirPods beep?
If the AirPods beep, it can be caused by the following:
- Bluetooth connection is too weak
- Volume is set too high
- Outdated firmware
- Noice canceling problems due to dirty microphone
- “Find My” app is activated
Can you make AirPods beep?
Yes, you can make AirPods beep to make them easier to locate if you misplace them.
How to make your AirPods ring?
AirPods can be made to ring using the “Find My” app. With this app you can locate the AirPods on a map and the ringing helps you find the AirPods in the surrounding area more easily. You can find out more about the app here.
